PayPal Acceptance Mark
Browse Categories
Browse by Manufacturer



 California Residents Warning:
Concerning Prop 65 Warning for
Products sold on
www.smemporium.com
Smoky Mountain Emporium Inc
 Click here for detailed information on Prop 65

RGV40H12 Hydro Vacuum Water Recovery Completely Self Contained, Gas Powered Vacuum Recovery System Honda GX630

RGV40H12 Hydro Vacuum Water Recovery Completely Self Contained
RGV40H12 Hydro Vacuum Water Recovery Completely Self ContainedRGV40H12 Hydro Tek HOT-2-GO Gas Vacuum Water Recovery Capture Transfer System 25 GPM Honda GX630Transfer Pump PlugAir Throttle Valve
: .
Manufacturer: Hot2Go Hydro Tex
Manufacturer Part No: RGV40H12

Product Options

Choose Product for Price:

RGV40H12 Hydro Vacuum Water Recovery Completely Self Contained, Gas Powered Vacuum Recovery System Honda GX630

Gas Engine Drive Vacuum Recovery System
Become EPA compliant and responsibly recover your wash water as you clean. The RGV Gas Vacuum will capture water 350’ away. Automatic pump out…no need to stop and dump the collection tanks or worry about the tanks overfilling. It is ideal for facilities maintenance contractors who need to collect wash water or for restoration contractors who need to pick up water after a fire or flood and need to have their rig parked far away. The vacuum system is gas powered and completely self-contained – no external power source needed.

Description

The RGV Gas Vac is an engine powered, water recovery system with pump out.  It can be used with either one or two separate pickup devices and is ideal for facilities maintenance contractors who need to collect wash water or for restoration contractors who need to pick up water after a fire or flood.
The unique polyethylene separation tanks are non-corrosive, weigh significantly less than 50 gallon steel drums, and have access to the inside for periodic cleaning & maintenance with a quick lift-off lid.  Open the large 1½” valve to purge sludge/solids that settle at the bottom.  Each separation tank has an automatic transfer system which pumps the water out to your bulk tank, landscape, or sanitary sewer where permitted, no heavy tipping to dump your tanks.

Features:

  • Completely self-contained Does not need a generator or 110v plug for the transfer pumps. Transfer pumps connect to an on-board 12v battery
  • Air throttle valve, on vacuum tanks, for precise control of air flow when using different pickup devices or varying hose lengths
  • Quick-plug connectors for transfer pumps & high water shutdown
  • Recovers up to 25gpm, use 350’ total hose length – Use with one or two pickup devices
  • Small footprint with fuel tank and battery box integrated into frame while keeping a small footprint
  • Lift-out strainer basket removes large debris before emptying into separation tank to protect transfer pump
  • Vacuum and pump out simultaneously and automatically, no loss of suction or lost time dumping tanks
  • Requires 2” diameter vacuum hose and 2” diameter discharge hose

Optional:  Solids/Sand separator tank (#ATP36)
Optional:  Modular filtration system (#RPF15E1)
Optional:   your choice of recovery surface cleaner, vacuum berms and accessories

  • VACUUM / BLOWER: Positive displacement blower creates vacuum through the included separation tanks
  • CFM / VERTICAL LIFT: 425 CFM / 14” Hg, 190” lift
  • ENGINE: 688cc Honda, key start (GX630)
  • FUEL: Unleaded gas - Large 8 gal. Fuel tank (50 states CARB and EPA Emissions Certified)
  • VACUUM TANK: Qty 2) 26 gal corrosion proof, polyethylene, hexagonal tanks – 1½” sludge/solids drain, Air throttle valves to precisely control suction, Auto pump out, High water shutdown
  • DEBRIS STRAINER: Lift out, easy to clean strainer basket for pump protection, 12” x 9.5” deep, 1000 micron, Pre filter/solids/sand separation tank is available as an option (ATP36)
  • TANK LID: Stainless steel, removable
  • TRANSFER PUMPS: Qty 2) transfer pumps, transfer pumps connect to onboard 12v battery power
  • POWER REQUIREMENTS: Self-contained, no outside power needed
  • INLET: Requires 2" diameter vacuum hoses (up to 350’), hot water compatible to 200°F
  • OUTLET: 2" diameter discharge hoses (up to 100’)
  • RECOVER & TRANSFER**: Up to 25 gpm with one or two pickup devices and total combined hose length of 350’
  • TEMPERATURE LIMITS: Up to 200° F
  • CONSTRUCTION: Powder coated, steel frame, and includes trailer/truck bed mounting holes
  • BATTERY: Not included, 650cca group 24 battery recommended
  • WEIGHT/DIM.: 44" long x 26” wide x 34” tall, 425# plus Qty 2) 54# vacuum tanks
  • *Specifications subject to change without notification and may vary due to ambient conditions. Note: Not for use with waste streams with high foaming soaps.
  • **Not intended to be fully immersed under water, consistent air introduction at the pickup is needed to prevent hydraulicing.

  Featuring:

  • Vacuum and pump out simultaneously and automatically, no loss of suction
  • Use with one operator or two – Recovers up to 25gpm at 350’
  • Vacuum separation tanks, with sediment dump valves, are non-corrosive poly and weight less than steel drums
  • Air throttle valve for precise control of air flow using different pick up devices or varying hose lengths
  • Small footprint with fuel tank and battery box
  • integrated into frame base

 Options…

  • 50' of 2" Vacuum hose (DHV50) – other lengths also available, vacuum scupper (ATP75), sand berms (ZMAT2, ZMAT6, ZMAT7), Vacuum arch (ATP40), Twister Vac (ANTV5) surface cleaner/vacuum attachment,
  • 15gpm filtration system option (RPF15E1)
  • Pre filter/Solids/Sand separation tank option (ATP36), use 1 or 2 per RGV
(Requires 2" diameter vacuum hose, 2" diameter discharge hose, and minimum 650cca battery) Sold Separately

Shipping for LTL ground deliveries within the 48 contiguous states

Warning California Residents:
Proposition 65
Detectable amount of chemicals known to the State of California to cause cancer, birth defects or other reproductive harm may be found in pressure washing equipment, accessories and exhaust.
For More Information Visit www.p65warnings.ca.gov

NOTE: If you do not have an elevated loading dock or forklift to unload your items from the truck, you will need a lift gate and must select this option at checkout.
There is an additional fee for adding Residential/Home LTL Curbside delivery Lift Gate Service to your shipment.

Normal lead time to process and ship product is 5 business days.

Current production time on this is approx 1 to 2 weeks, they are built to order.

Email: quote@smemporium.com for quote

Related Accessory Products

Search
Browse Categories